Conveyor belt daily maintenance repair raiders at port terminal

During the daily operation of the harbor terminal belt, due to the wind and the sun and the erosion of various materials, problems such as damage and scratches are inevitable. In order to be able to timely protection of the conveyor belt, conveyor belt need to be familiar with the daily maintenance of repair related knowledge.

Port terminal conveyor belt daily maintenance repair

Take preventive measures:
Regular inspection of the conveyor belt, conveyor belt operation in accordance with the timely adjustment of related equipment to prevent conveyor belt wear. Timely remove the surface of the conveyor belt attached to prevent the conveyor belt during operation scratch, tear occurred.

A problem has been solved:
When the conveyor belt surface damage, scratches, tears and other issues, timely repairs to prevent wounds to expand, causing greater damage to the conveyor belt, increasing business costs.

With the relevant materials in advance:
Enterprises should be standing conveyor belt repair related materials, so that problems can be dealt with when the first time, the operating mode is generally selected cold cure, can be field operations, without large equipment. The required materials are generally cold vulcanized glue CV-2000A, CVUL conveyor belt repair tape.

Including cold vulcanized glue CV-2000A usually with the CVUL conveyor repair patch for moderate and severe damage to the conveyor belt repair, glue is responsible for the wound site bonding, repair patch is responsible for fitting. In addition to the combination of both to ensure bonding effect, but also can effectively prevent the expansion of the wound, effectively prevent the conveyor belt slip deviation.

Cold vulcanized rubber repair CV-2000A generally mild conveyor belt damage repair treatment, the repair agent directly applied to the damaged parts, the use of scraping scraping to complete the repair operation, very convenient.

Grasp the site repair skills conveyor:
After the materials are ready, of course, there will be on-site operations, so as to achieve the purpose of repairing. 
The use of angle grinder with tungsten steel disc on the conveyor belt damaged parts polished, then brush the cleaning agent to wash away the surface impurities, oil, cold vulcanized glue brushing the damaged parts, to be dried and then brush it again, while Repair adhesive surface brushing again vulcanized glue, and then patch the patch attached to the damaged parts, the use of compaction roller compaction can be. (If the choice of repair agent, then grinding, cleaning, rubbed in the damaged parts of the rubber repair agent, then use the scraper to be flat, to be dry)